ADTRAN AOS Version R10.1.0 Command Reference Manual page 2159

Command Reference Guide
ppp pap sent-username <username> password <password>
Use the ppp pap sent-username password command to configure a user name and password when the
peer requires Password Authentication Protocol (PAP) Point-to-Point Protocol (PPP) authentication. Use
the no form of this command to remove a configured password. For more information on PAP and
Challenge-Handshake Authentication Protocol (CHAP) functionality, refer to the Technology Review
section for the command
Syntax Description
<username>
<password>
Default Values
By default, there is no defined ppp pap sent-username and password.
Command History
Release 1.1
Release 11.1
Usage Examples
The following example specifies a PPP PAP sent-user name of local and a password of my_password:
(config)#interface demand 1
(config-demand 1)#ppp pap sent-username local password my_password
60000CRG0-35E
ppp authentication on page
Specifies a user name by alphanumeric string up to 80 characters in length
(the user name is case sensitive).
Specifies a password by alphanumeric string up to 80 characters in length
(the password is case sensitive).
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2148.
2159