ADTRAN AOS Version R10.1.0 Command Reference Manual page 2214

Command Reference Guide
dial-backup restore-delay <value>
Use the dial-backup restore-delay command to configure the amount of time the router will wait after the
network is restored before disconnecting the backup link and reverting to the primary. This setting is used
to prevent disconnecting the backup link if the primary link is bouncing in and out of alarm. Use the no
form of this command to return to the default setting. For more detailed information on dial-backup
functionality, refer to the Functional Notes and Technology Review sections of
page 2203.
Syntax Description
<value>
Default Values
By default, dial-backup restore-delay is set to 10 seconds.
Command History
Release 1.1
Usage Examples
The following example configures AOS to wait 30 seconds before disconnecting dial-backup operation and
restoring the primary connection for this endpoint:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup restore-delay 30
60000CRG0-35E
Specifies the number of seconds AOS will wait (after a primary link is
restored) before disconnecting dial-backup operation. Range is 10 to
86400 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Subinterface Command Set
dial-backup call-mode on
2214