Table of Contents
Advertisement
Command Reference Guide
EFM Group Command Set
xcv-link-removal
Use the xcv-link-removal command to remove an interface's link from the Ethernet in the first mile
(EFM) group if the excessive code violation threshold is exceeded. This threshold is set using the
command
thresholds xcv on page
2169. Using the no form of this command disables the link removal.
Syntax Description
No subcommands.
Default Values
By default, link removal is enabled for the EFM group.
Command History
Release A4.01
Command was introduced.
Usage Examples
The following example specifies that an interface whose excessive code violations exceed the threshold is
no longer linked to EFM group 1:
(config)#interface efm-group 1
(config-efm-group 1)#xcv-link-removal
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2170
Advertisement
Table of Contents
