ADTRAN AOS Version R10.1.0 Command Reference Manual page 2142

Command Reference Guide
lldp receive
Use the lldp receive command to allow Link Layer Discovery Protocol (LLDP) packets to be received on
this interface. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command History
Release 9.1
Release 11.1
Usage Examples
The following example configures the demand interface to receive LLDP packets:
(config)#interface demand 1
(config-demand 1)#lldp receive
60000CRG0-35E
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2142