Table of Contents
Advertisement
Command Reference Guide
Frame Relay Subinterface Command Set
dial-backup auto-restore
Use the dial-backup auto-restore command to configure the interface to automatically discontinue
dial-backup when all network conditions are operational. Use the no form of this command to disable the
auto-restore feature. For more detailed information on dial-backup functionality, refer to the Functional
Notes and Technology Review sections of
dial-backup call-mode on page
2203.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example configures AOS to automatically restore the primary connection when the failure
condition clears:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup auto-restore
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2201
Advertisement
Table of Contents
