ADTRAN AOS Version R10.1.0 Command Reference Manual page 2136

Command Reference Guide
ip route-cache
Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this
command to disable fast-cache switching and return to process switching mode.
Using network address translation (NAT) or the AOS firewall capabilities on an interface
requires process switching mode (using the no ip route-cache command).
Syntax Description
No subcommands.
Default Values
By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay subinterfaces. IP route
cache is enabled for all virtual demand interfaces.
Command History
Release 2.1
Release 11.1
Functional Notes
Fast-cache switching allows an IP interface to provide optimum performance when processing IP traffic.
Usage Examples
The following example enables fast-cache switching on the virtual demand interface:
(config)#interface demand 1
(config-demand 1)#ip route-cache
60000CRG0-35E
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2136