ADTRAN AOS Version R10.1.0 Command Reference Manual page 2161

Command Reference Guide
resource pool <name>
Use the resource pool command to associate a resource pool with the demand interface. No more than one
resource pool may be associated with an interface. Refer to
for more information. Use the no form of this command to restore the default value.
Syntax Description
<name>
Default Values
By default, no resource pool is associated with this interface.
Command History
Release 11.1
Usage Examples
The following example associates the resource pool named Pool1 with demand interface 1:
(config)#interface demand 1
(config-demand 1)#resource pool Pool1
60000CRG0-35E
Specifies the resource pool that this interface will use to originate/answer
demand connections.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
resource pool-member <name> on page 1535
2161