Command Reference Guide
ppp chap password <password>
Use the ppp chap password command to configure an alternate password when the peer requires
Challenge-Handshake Authentication Protocol (CHAP) Point-to-Point Protocol (PPP) authentication. Use
the no form of this command to remove a configured password. For more information on Password
Authentication Protocol (PAP) and CHAP functionality, refer to the Technology Review section for the
command
ppp authentication on page
Syntax Description
<password>
Default Values
By default, there is no defined PPP CHAP password.
Command History
Release 1.1
Release 11.1
Usage Examples
The following example specifies a PPP CHAP password of my_password:
(config)#interface demand 1
(config-demand 1)#ppp chap password my_password
60000CRG0-35E
2148.
Specifies a password using an alphanumeric string up to 80 characters in
length.
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2155
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers