Table of Contents
Advertisement
Command Reference Guide
lldp send
Use the lldp send command to configure this interface to transmit Link Layer Discovery Protocol (LLDP)
packets or to control the types of information contained in the LLDP packets transmitted by this interface.
Use the no form of this command to disable this feature. Variations of this command include:
lldp send
lldp send management-address
lldp send port-description
lldp send system-capabilities
lldp send system-description
lldp send system-name
lldp send-and-receive
Syntax Description
management-address
port-description
system-capabilities
system-description
system-name
and-receive
Default Values
By default, all interfaces are configured to transmit and receive LLDP packets of all types.
Command History
Release 9.1
Release 11.1
Functional Notes
Individual LLDP information can be enabled or disabled using the various forms of the lldp send
command. For example, use the lldp send-and-receive command to enable transmit and receive of all
LLDP information. Then use the no lldp send port-description command to prevent LLDP from
transmitting port description information.
Usage Examples
The following example configures the demand interface to transmit LLDP packets containing all enabled
information types:
(config)#interface demand 1
(config-demand 1)#lldp send
60000CRG0-35E
Enables transmission of management address information on this interface.
Enables transmission of port description information on this interface.
Enables transmission of this device's system capabilities on this interface.
Enables transmission of this device's system description on this interface.
Enables transmission of this device's system name on this interface.
Configures this interface to both transmit and receive LLDP packets.
Command was introduced.
Command was expanded to include the demand interface.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2143
Advertisement
Table of Contents
