ADTRAN AOS Version R10.1.0 Command Reference Manual page 2158

Command Reference Guide
ppp mtu <size>
Use the ppp mtu command to configure the Point-to-Point Protocol (PPP) maximum transmission unit
(MTU) size for the active interface. Use the no form of this command to return to the default value.
Syntax Description
<size>
Default Values
By default, the PPP MTU on an interface is set to 1500 bytes.
Command History
Release 17.9
Usage Examples
The following example specifies a PPP MTU of 1200 on the virtual demand interface:
(config)#interface demand 1
(config-demand 1)#ppp mtu 1200
60000CRG0-35E
Configures the window size for transmitted packets. The valid range is 64 to
2100 bytes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2158