Table of Contents
Advertisement
Command Reference Guide
frame-relay lmi-type
Use the frame-relay lmi-type command to define the Frame Relay signaling (local management interface
(LMI)) type. Use the no form of this command to return to the default value. Variations of this command
include:
frame-relay lmi-type ansi
frame-relay lmi-type auto
frame-relay lmi-type cisco
frame-relay lmi-type none
frame-relay lmi-type q933a
Syntax Description
ansi
auto
cisco
none
q933a
Default Values
By default, the Frame Relay signaling type is set to ansi.
Command History
Release 1.1
Release 2.1
Usage Examples
The following example sets the signaling method for the endpoint to cisco:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay lmi-type cisco
60000CRG0-35E
Specifies Annex D signaling method.
Automatically determines signaling type by messages received on the
frame circuit.
Specifies Group of 4 signaling method.
Turns off signaling on the endpoint. This is used for dial-backup connections
to ADTRAN IQ and Express Series products.
Specifies Annex A signaling method.
Command was introduced.
Added signaling type none to provide support for dial-backup to ADTRAN
IQ and Express Series products.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Interface Command Set
2183
Advertisement
Table of Contents
