ADTRAN AOS Version R10.1.0 Command Reference Manual page 2208

Command Reference Guide
dial-backup force
Use the dial-backup force command to manually override the automatic dial-backup feature. This can be
used to force a link into backup to allow maintenance to be performed on the primary link without
disrupting data. Use the no form of this command to return to the normal dial-backup operation state. For
more detailed information on dial-backup functionality, refer to the Functional Notes and Technology
Review sections of dial-backup call-mode on page
dial-backup force backup
dial-backup force primary
Syntax Description
backup
primary
Default Values
By default, this feature is disabled.
Command History
Release 1.1
Usage Examples
The following example configures AOS to force this interface into dial backup:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup force backup
60000CRG0-35E
2203. Variations of this command include:
Force backup regardless of primary link state.
Force primary link regardless of its state.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Subinterface Command Set
2208