Table of Contents
Advertisement
PPP and MP configuration commands
PPP configuration commands
ip address ppp-negotiate
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
View
Synchronous serial interface view
Default level
2: System level
Parameters
None
Description
Use the ip address ppp-negotiate command to enable IP address negotiation on the local interface, so
that the local interface can accept the IP address allocated by the peer end.
Use the undo ip address ppp-negotiate command to disable IP address negotiation.
By default, IP address negotiation is disabled.
Related commands: remote address and ppp ipcp remote-address forced.
Examples
# Enable IP address negotiation on Serial 4/1/9/1:0.
<Sysname> system-view
[Sysname] interface Serial 4/1/9/1:0
[Sysname-Serial4/1/9/1:0] ip address ppp-negotiate
ip pool
Syntax
ip pool pool-number low-ip-address [ high-ip-address ]
undo ip pool pool-number
View
System view, ISP domain view
Default level
2: System level
28
Advertisement
Table of Contents
