Shutdown; Vtep Group Member Local - H3C MSR 810 Command Reference Manual

Parameters
vsi-interface [ vsi-interface-id ]
the specified VSI interface has been created on the device. If you do not specify the
vsi-interface [ vsi-interface-id ]
interfaces except for VA interfaces. If you specify only the
command clears packet statistics on all VSI interfaces. If you specify a VSI interface, this command
clears packet statistics on the specified interface.
Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
Examples
# Clear packet statistics on VSI-interface 100.
<Sysname> reset counters interface vsi-interface 100
Related commands
display interface vsi-interface

shutdown

Use
shutdown
Use
undo shutdown
Syntax
shutdown
undo shutdown
Default
A VSI interface is not manually shut down.
Views
VSI interface view
Predefined user roles
network-admin
Examples
# Shut down VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] shutdown

vtep group member local

Use
vtep group member local
Use
undo vtep group member local
Syntax
vtep group group-ip member local member-ip
undo vtep group group-ip member local
to shut down a VSI interface.
to bring up a VSI interface.
to assign the local VTEP to a VTEP group.
: Specifies a VSI interface by its number. Make sure
option, this command clears packet statistics on all
vsi-interface
to remove the local VTEP from a VTEP group.
45
keyword, this