H3C MSR 20-20 Command Reference Manual page 637

Related command:
Example
If a specified VLAN exists, the command places you into its view.
Use the command to delete specified VLAN(s).
undo vlan
Note that:
As the default VLAN, VLAN 1 cannot be created or removed.
■
You cannot create/remove reserved VLANs that are reserved for specific
■
function implementation.
Dynamic VLANs cannot be removed using the undo vlan command.
■
A VLAN associated with QoS policies cannot be removed.
■
display vlan.
# Enter VLAN 2 view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2]
# Create VLAN 4 through VLAN 100.
<Sysname> system-view
[Sysname] vlan 4 to 100
Please wait............. Done.
637