Neighbor Graceful-Restart Restart-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor graceful-restart restart-time

neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart restart-time
Syntax
seconds
no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart restart-time
[ seconds ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Sets the time period advertised to a specific peer or peer group during which a restart
Description
is expected to be complete on this BGP speaker. If the speaker does not reestablish
peering sessions within this period, the peer flushes all routes from this speaker that
it marked as stale when the speaker restarted and the session went down. The no
version restores the default value, 120 seconds.
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
seconds Integer in the range 1–3600; default value is 120 seconds
Chapter 2: N Commands
neighbor graceful-restart restart-time
41