Creating Or Modifying Classifier Control Lists For Ipv6 Policy Lists; Creating Or Modifying Classifier Control Lists For L2Tp Policy Lists; Creating Or Modifying Classifier Control Lists For Mpls Policy Lists - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide

Creating or Modifying Classifier Control Lists for IPv6 Policy Lists

You can create or modify a classifier control list that can be used only in IPv6 policy
lists.
Related Topics

Creating or Modifying Classifier Control Lists for L2TP Policy Lists

You can create or modify a classifier control list that can be used only in L2TP policy
lists.
Related Topics

Creating or Modifying Classifier Control Lists for MPLS Policy Lists

You can create or modify a classifier control list that can be used only in MPLS policy
lists.
14
Creating or Modifying Classifier Control Lists for IPv6 Policy Lists
Issue the ipv6 classifier-list command:
host1(config)#ipv6 classifier-list ipv6classifier color red user-packet-class 5
tcfield 10
host1(config)#ipv6 classifier-list YourListName udp destination-port eq 75
host1(config)#ipv6 classifier-list telnetConnects tcp destination-port eq 23
tcp-flags "syn & !ack"
host1(config)#ipv6 classifier-list listname icmpv6 icmp-type 3 icmp-code 6
host1(config)#ipv6 classifier-list svale20 source-route-class 1
host1(config)#ipv6 classifier-list svale30 destination-route-class 1 tcfield 10
host1(config)#ipv6 classifier-list svale40 source-route-class 1 local true
host1(config)#ipv6 classifier-list west25 source-route-class 1 local false
host1(config)#ipv6 classifier-list YourClaclList source-host 2001:db8:1::8001
destination-address 2001:db8:3::/48
ipv6 classifier-list
Issue the l2tp classifier-list command:
host1(config)#l2tp classifier-list l2tpclassifier color red user-packet-class 7
l2tp classifier-list
Issue the mpls classifier-list command:
host1(config)#mpls classifier-list mplsClass user-packet-class 10 exp-bits 3
exp-mask 5