Ipv6 Dhcpv6-Local Prefix-Lifetime - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ipv6 dhcpv6-local prefix-lifetime
Syntax
Release Information
Description
Options
Mode
1018
ipv6 dhcpv6-local prefix-lifetime { days [ hours [ minutes [ seconds ] ] ] | infinite }
no ipv6 dhcpv6-local prefix-lifetime
Command introduced before JunosE Release 7.1.0.
Sets the default lifetime for which a prefix delegated by this DHCPv6 local server is valid.
This default is overridden by the interface-specific lifetime. The no version restores the
default lifetime to 1 day.
days—Number of days in the lifetime; in the range 0–32768
hours—Number of hours in the lifetime; in the range 0–24
minutes—Number of minutes in the lifetime; in the range 0–60
seconds—Number of seconds in the lifetime; in the range 0–60
infinite—Assigns a lifetime that does not expire
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers