Pim Hello-Option Holdtime - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Description
Use the pim hello-option dr-priority command to configure the router priority for DR
election on the current interface.
Use the undo pim hello-option dr-priority command to restore the system default.
By default, the router priority for DR election is 1.
Related commands: hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option dr-priority 3

4.1.37 pim hello-option holdtime

Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
View
Interface view
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the pim hello-option holdtime command to configure the PIM neighbor timeout
time on the current interface.
Use the undo pim hello-option holdtime command to restore the system default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the PIM neighbor timeout time to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option holdtime 120
Chapter 4 PIM Configuration Commands
4-36