Peer Sa-Request-Policy - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
System View: return to User View with Ctrl+Z.
[H3C] acl number 3100
[H3C-acl-adv-3100] rule permit ip source 170.15.0.0 0.0.255.255 destination
225.1.0.0 0.0.255.255
[H3C-acl-adv-3100] quit
[H3C] msdp
[H3C-msdp] peer 125.10.7.6 connect-interface Vlan-interface 100
[H3C-msdp] peer 125.10.7.6 sa-policy export acl 3100

7.1.18 peer sa-request-policy

Syntax
peer peer-address sa-request-policy [ acl acl-number ]
undo peer peer-address sa-request-policy
View
MSDP view
Parameter
peer-address: IP address of an MSDP peer, the SA request messages sent from which
will be filtered
acl-number: Basic IP ACL number, describing a multicast group address and in the
range of 2000 to 2999. If no ACL is specified, all SA request messages will be ignored.
Description
Use the peer sa-request-policy command to limit the SA request messages that the
router receives from an MSDP peer.
Use the undo peer sa-request-policy command to remove the limitation.
By default, the router receives all SA request messages from the MSDP peer.
If no ACL is specified, all SA requests will be ignored. If an ACL is specified, only those
SA request messages from the groups that match the ACL rule will be processed and
others are ignored.
Related command: peer.
Example
# Configure an ACL so that SA request messages from the group address range of
225.1.1.0/24 and from the MSDP peer 175.58.6.5 are received and other SA messages
are ignored.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] acl number 2001
Chapter 7 MSDP Configuration Commands
7-16