Table of Contents
Advertisement
Wi-Fi LAN adapters
Raritan USB WIFI
Supported Wireless LAN Configuration
If wireless networking is preferred, ensure that the wireless LAN configuration of your PXC/PXO matches the access point.
•
Network type: 802.11 a/b/g/n.
•
Protocol: WPA2 (RSN).
•
Key management: WPA-PSK, WPA-EAP with PEAP and MSCHAPv2 authentication, WPA-EAP with TLS authentication, or WPA-EAP with PEAP
and TLS authentication.
•
Encryption: CCMP (AES)
Tip: Supported 802.11 network protocols vary according to the wireless LAN adapter being used.
Making a Wireless Connection
•
Plug a supported USB wireless LAN adapter into the USB-A port on your PXC/PXO.
OR
•
Connect a USB hub to the USB-A port on the PXC/PXO. Then plug the supported USB wireless LAN adapter into the appropriate USB port on
the hub.
QS Rule
Appendix C: More Information
Disconnecting Devices from 'Locking' Outlets
Not every PXC/PXO is implemented with locking outlets.
Locking outlets, if available on your PXC/PXO, help secure the connection of power cords from your IT equipment to PXC/PXO.
To remove an IT device from a locking outlet:
1. Press and hold down the tiny button adjacent to the PXC/PXO outlet.
2. Unplug the power cord now.
Identifying the Sensor Port
Warning: Only connect environmental sensors to the SENSOR port, or damages may be caused to the device and the sensor packages.
•
The correct port is labeled SENSOR and highlighted yellow.
PXC_PXO Quick Setup Guide
PXC_PXO_QSG_A1_4.0.10 255-80-0059-00 RoHS
Supported 802.11 protocols
A/B/G/N
8
Advertisement
Table of Contents
