Setup And Configuration; Physical Installation; Desktop/Shelf Installation - LEGRAND Luxul AGS-1024 Quick Install Manual

SETUP AND CONFIGURATION

1

Physical Installation

The AGS-1024 can be rack-mounted or used as a desktop switch. Install the
AGS-1024 in a stable/safe place to avoid any possible damage. Avoid placement
in direct sunlight. Do not place heavy articles on the AGS-1024 and verify the
ground connection of the outlet is functioning properly.

Desktop/Shelf Installation

For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AGS-1024, then place the switch horizontally on
a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio/video rack. Use four screws to attach the L-shaped brackets on both
sides of the AGS-1024 as shown below, then install the switch horizontally in
the rack. Use your desired hardware to affix the switch brackets to the rack.
Attach Feet for Desktop Installation Install Brackets for Rack-Mounting