Table of Contents
Advertisement
Chapter 4: On-Screen Display Interface
18
User Configuration
On the SETUP Menu, press F5. The User Configuration Menu displays.
MCD-DUAL provides one administrator and 15 user accounts.
Note: Operation Key "F1" is not available to setup admin's Port Access
•
right.
•
Press
or
to select the desired user. Press Page Up or Page Down
if the desired user is not shown on the current page.
•
Press Enter, and that user's password change page displays. Then follow
either procedure below.
After finishing the user accounts changes, press Esc to exit the User
•
Configuration page.
To change the administrator's password
1. In the New Password field, type the new password, and press Enter. A
password comprises up to 8 characters.
2. Re-type the password and press Enter. To abort the changes, press Esc
instead.
Advertisement
Table of Contents
