3
Connecting Devices
Use an Ethernet cable to connect the AGS-1024 to a device as shown
below. Luxul recommends at least Cat-5e unshielded twisted pair (CAT5e
UTP) cabling. To ensure best performance and stable data transmission at
1000 Mbps, use Category-6 unshielded twisted pair (CAT6 UTP).
The AGS-1024 automatically adjusts to the speed and duplex of the
connected device.
Connecting the AGS-1024 to a Device
When a device is properly connected and powered, the Link/Activity LED
for the device port lights up. Refer to the Hardware Operation section for
indicator definitions and troubleshooting.