Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
7.4
Remote Firmware Update via Embedded web interface
Figure 7-2 File Operations Window
1. From the Embedded web interface main screen, click on Files. The Files window
appears as shown in Figure 7-2.
2. In the File Server tab update the IP address of the File Server that will be used to
download new firmware versions to the device (The specified IP must have a running
TFTP server program).
3. In the Operation tab update the file name of the new firmware version to download to
the device.
4. Select the desired operation from the Command list. Be sure to match the file type with
the command (.bin with Download Image, .con with Download Content).
NOTE: In order to perform a download or upload operation, the Command being executed
must be colored blue, indicating a changed setting. Clicking apply without changing the
Command, even if it was set in advance to your desired setting, will not proceed with the
command.
5. While downloading / updating the image and content files (this may take several
minutes) the Status field will change depending on the current operation being
executed. At the end of the process, that field will update again to announce the
successful or failed update.
NOTE: Since each file downloads separately, after downloading one file, repeat steps 5
and 6 in order to download another file.
SUMMARY
Page 76 of 87
Advertisement
Table of Contents
