Tampering Prevention And Detection; Using Qualified Peripheral Devices Only - LEGRAND Raritan RSS4-102 Administrator's Manual

•
If an extension cord is used with this device make sure that the total of the ampere ratings of all
products used on this cord does not exceed the extension cord ampere rating. Make sure that the
total of all products plugged into the wall outlet does not exceed 15 amperes.
•
To help protect your system from sudden, transient increases and decreases in electrical power, use
a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
•
Position system cables and power cables carefully; Be sure that nothing rests on any cables.
•
Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage
points or short out parts resulting in a risk of fire or electrical shock.
•
Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.
•
If the following conditions occur, unplug the device from the wall outlet and bring it to qualified
service personnel for repair.
•
The power cord or plug has become damaged or frayed.
•
Liquid has been spilled into the device.
•
The device has been exposed to rain or water.
•
The device has been dropped, or the cabinet has been damaged.
•
The device exhibits a distinct change in performance, indicating a need for service.
•
The device does not operate normally when the operating instructions are followed.
CAUTION: Never attempt battery replacement or open the switches' enclosure.
▶
CAUTION for MAINTENANCE STAFF:
•
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
•
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Tampering Prevention and Detection

•
The Secure Switch and Remote Port Selector include a tamper-evident tape to provide visual
indications of intrusion to its enclosure. If the tamper-evident seal is missing, peeled, or looks as if
it's been adjusted, DO NOT use it and contact your Raritan dealer immediately
•
The Secure Switch and Remote Port Selector are equipped with active always-on chassis intrusion
detection. If a mechanical intrusion is detected, the Secure Switch will be permanently disabled and
its front panel LEDs will flash continuously. If this product's enclosure appears breached or all LEDs
are flashing continuously, stop using it, remove it from service immediately and contact your dealer.
•
Never attempt to open the Secure Switch's or Remote Port Selector's enclosure. Any attempt to
open the enclosure will permanently damage and disable this product. The attempt to open its
enclosure will activate the chassis intrusion detection security, which will render it inoperable and
void the warranty.
•
The Secure Switch and Remote Port Selector cannot be upgraded, serviced or repaired.
•
The Secure Switch contains an internal battery which is non-replaceable. Never attempt battery
replacement or open the Secure Switch's enclosure. The internal battery inside the KVM
ensures that the clock is active at all times and allows for accurate time recordings for all
events. The initial date is set in each KVM manually at the time of manufacturing.

Using Qualified Peripheral Devices Only

For security purposes, you must always connect supported and authorized peripheral devices to the
Secure Switch. Otherwise, the Secure Switch may not function properly.
8