Ntdp Explore; Ntdp Hop - H3C S5120-SI Series Command Reference Manual

quit the aggregation group. For description of aggregation configurations, refer to Link Aggregation
Configuration.
Examples
# Enable NTDP globally.
<Sysname> system-view
[Sysname] ntdp enable
# Enable NTDP for port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ntdp enable

ntdp explore

Syntax
ntdp explore
View
User view
Default Level
2: System level
Parameters
None
Description
Use the ntdp explore command to start topology information collection manually.
Examples
# Start topology information collection manually.
<Sysname> ntdp explore

ntdp hop

Syntax
ntdp hop hop-value
undo ntdp hop
View
System view
Default Level
2: System level
1-12