Display Portal Interface - H3C MSR 20-20 Command Reference Manual

Related command:
Example

display portal interface

Syntax
View
Parameter
Description
Example
portal free-rule.
# Display the information of authentication-free rule 1.
<Sysname> display portal free-rule 1
Rule-Number 1:
Source:
IP = 2.2.2.0
Mask = 255.255.255.0
MAC = 0000-0000-0000
Interface = any
Vlan = 0
Destination:
IP = 0.0.0.0
Mask = 0.0.0.0
Table 538 Description on the fields of the display portal free-rule command
Field Description
Rule-Number Number of an authentication-free rule
Source Source information in an authentication-free rule
IP Source IP address in an authentication-free rule
Mask Subnet mask of the source IP address in an authentication-free rule
MAC Source MAC address in an authentication-free rule
Interface Source interface in an authentication-free rule
Vlan Source VLAN in an authentication-free rule
Destination Destination information in an authentication-free rule
IP Destination IP address in an authentication-free rule
Mask Subnet mask of the destination IP address in an authentication-free rule
display portal interface interface-type interface-number
Any view
interface interface-type interface-number: Specifies an interface by interface type
and interface number.
Use the
display portal interface
on the specified interface.
# Display the portal configuration on Ethernet 1/0.
<Sysname> display portal interface ethernet 1/0
Interface portal configuration:
Ethernet1/0: Portal running
Portal server: servername
Authentication type: Direct
Service type: Normal
Authentication network:
address = 0.0.0.0
command to display the portal configuration
mask = 0.0.0.0
2069