Table of Contents
Advertisement
Step
3.
Specify the destination
URL for exporting
accounting bills.
4.
Set an interval at which
accounting bills are
exported automatically.
5.
(Optional.) Enable SNMP
notification for automatic
bill export.
6.
Export the accounting bills
manually to the specified
URL.
Display and maintenance commands for local bill cache
Execute display commands in any view.
Task
Display detailed information about a series of
consecutive accounting bills.
Display usage statistics of the local bill cache.
Configuring a NAS-ID
About NAS-IDs
During RADIUS authentication, the device uses a NAS-ID to set the NAS-Identifier attribute of
RADIUS packets so that the RADIUS server can identify the access location of users.
You can configure a NAS-ID in NAS-ID profile view, in interface view, or in ISP domain view. The
device selects the NAS-ID for the NAS-Identifier attribute in the following order:
1.
NAS-ID bound with VLANs in a NAS-ID profile.
2.
NAS-ID on an interface.
3.
NAS-ID in an ISP domain.
If no NAS-ID is selected, the device uses the device name (set by using the sysname command) as
the NAS-ID.
Configuring a NAS-ID profile
Configure a NAS-ID profile to maintain NAS-ID and VLAN bindings on the device so that the device
can send different NAS-Identifier attribute strings in RADIUS requests from different VLANs.
You can apply a NAS-ID profile to portal-enabled interfaces. For more information, see
portal
authentication."
A NAS-ID can be bound with more than one VLAN or one combination of inner VLAN and outer
VLAN. A VLAN or a combination of inner VLAN and outer VLAN can be bound with only one NAS-ID.
If you configure multiple bindings for the same VLAN, the most recent configuration takes effect.
To configure a NAS-ID profile:
Command
local-bill export-url url
local-bill export-interval interval
snmp-agent trap enable local-bill
local-bill export [ url ]
[ clear-cache ]
Command
display local-bill verbose start-number count
count
display local-bill cache-usage
66
Remarks
By default, no URL is specified.
By default, the interval is 1440
minutes.
By default, SNMP notification is
enabled for automatic bill export.
N/A
"Configuring
Advertisement
Table of Contents
Troubleshooting
