Display Ethernet Statistics - H3C VSR Series Command Reference Manual

Virtual services routers
Table of Contents

Advertisement

Overflow: More than 14 digits.
--: Not supported.
Table 2 Command output
Field
Interface
Total (pkts/sec)
Broadcast (pkts/sec)
Multicast (pkts/sec)
Overflow: more than 14
decimal digits
--: not supported
Related commands
flow-interval
reset counters interface

display ethernet statistics

Use display ethernet statistics to display the Ethernet module statistics.
Syntax
In standalone mode:
display ethernet statistics
In IRF mode:
display ethernet statistics slot slot-number
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Examples
# (In standalone mode.) Display the Ethernet module statistics.
<Sysname> display ethernet statistics
ETH receive packet statistics:
Totalnum
SNAPNum
Description
Abbreviated interface name.
Average receiving or sending rate (in pps) for unicast packets over the last
statistics polling interval.
Average receiving or sending rate (in pps) for broadcast packets over the last
statistics polling interval.
Average receiving or sending rate (in pps) for multicast packets over the last
statistics polling interval.
The command displays Overflow if the data length of a statistical item is greater
than 14 decimal digits.
The statistical item is not supported.
: 10447
ETHIINum
: 0
RAWNum
11
: 4459
: 0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsr1000Vsr2000

Table of Contents