Protection Covers - ABB IRB 1200 Product Manual

2 Installation and commissioning

2.2.2 Protection covers

2.2.2 Protection covers
Protection covers for water and dust proofing
For robots delivered with option 803-2 Ethernet, Parallel, Air (IRC5)
For robot delivered with option 3303-2 Ethernet, Parallel, Air (OmniCore)
A dust cap and two protectors are delivered together with the robot and must be
well fitted to the connectors in any application requiring water and dust proofing.
Equipment
Dust cap
M12 protector
RJ 45 protector
Protection covers for Foundry Plus robots
For robots with protection type Foundry Plus
Extra protection covers, sealing and plugs are delivered together with Foundry
Plus robots and must be fitted to the robot during installation.
Equipment
Protection bracket for
CP/CS connectors
Protection cover for axis-
6 turning disk
T40 variseal sealing
Protection plug for lifting
holes
44
Art. no.
3HEA800897-002
3HAC047543-001
3HAC047539-001
Art. no.
3HAC058350-001
3HAC044666-001
3HAC044641-012
3HAC4836-24
© Copyright 2014 - 2021 ABB. All rights reserved.
Note
Used to cover unused connectors for
water and dust proofing. Replace if
damaged.
Used with option 803-2 (IRC5) or option
3303-2 (OmniCore).
Used to cover unused connectors for
water and dust proofing. Replace if
damaged.
Used with option 803-2 (IRC5) or option
3303-2 (OmniCore).
Used to cover unused connectors for
water and dust proofing. Replace if
damaged.
Note
Used with protection type Foundry Plus.
Replace if damaged.
Used with protection type Foundry Plus.
Replace if damaged.
Used with protection type Foundry Plus.
Replace if damaged.
Used with protection type Foundry Plus.
Replace if damaged.
Product manual - IRB 1200
3HAC046983-001 Revision: S