ABB IRB 1200 Product Manual page 159

Refitting
1
2
3
4
5
6
Product manual - IRB 1200
3HAC046983-001 Revision: S
4.2.1 Cut the paint or surface on the robot before replacing parts
Note
Refitting is required only for robots with protection type Clean Room, with food
grade lubrication and with protection type Hygienic.
Action
Before the parts are refitted, clean the joint
so that it is free from oil and grease.
Place the tooling pin in hot water.
Seal all refitted joints with sealing compound.
Use the tooling pin to even out the surface
of the sealing compound.
For robots with protection type Clean Room
For robots with food grade lubrication
Wait 10 minutes.
For robots with protection type Hygienic
Wait 40 minutes.
Use Touch up paint Clean Room/Hygienic,
white to paint any damaged surfaces.
Note
Always read the instruction in the product
data sheet in the paint repair kit for Clean
Room/Hygienic.
© Copyright 2014 - 2021 ABB. All rights reserved.
Description
Use ethanol on a lint free cloth.
xx0900000122
xx0900000125
For robots with protection type Clean
Room
For robots with food grade lubrication
Sikaflex 521FC skin dry time (10 minutes).
For robots with protection type Hygienic
Trans Clear skin dry time (40 minutes).
3HAC036639-001
Continues on next page
4 Repair
Continued
159