2
3
Product manual - IRB 1200
3HAC046983-001 Revision: S
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the safeguarded space.
If the lamp is not lit, trace the fault by:
•
inspecting whether the signal lamp is broken.
If so, replace it.
•
inspecting cable connections.
•
inspecting the cabling. Replace the cabling if
a fault is detected.
© Copyright 2014 - 2021 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspecting the signal lamp (option)
Note
Article number is specified in
quired tools and equipment on
page
132.
Continued
Re-
133