xx1600001036
Spare parts
When calibration is not being performed, a protective plug should always be
installed in the bushing. Replace damaged parts with new, if needed.
Spare part
Protective plug for bushing
Protective plug for bushing, Clean
Room
Protective plug for bushing, food
grade lubrication
Protective plug for bushing, Hygien-
ic
Product manual - IRB 1200
3HAC046983-001 Revision: S
5.4.3 Installation locations for the calibration tools
Article number
3HAC059556-001
3HAC059557-001
© Copyright 2014 - 2021 ABB. All rights reserved.
5 Calibration
Continued
Note
Replace if damaged or missing.
Used with protection type Clean
Room
Used for robots with food grade
lubrication
Used with protection type Hygien-
ic
Replace if damaged or missing.
825