ABB IRB 1200 Product Manual page 538

4 Repair
4.5.1 Replacing the base spare parts (base, axis-1 radial sealing, protection sleeve)
Continued
6
7
8
Continues on next page
538
Action
Secure with attachment screws and wash-
ers, but do not tighten yet.
Remove the guide pins and refit the remain-
ing attachment screws and washers.
Tighten all screws.
© Copyright 2014 - 2021 ABB. All rights reserved.
Note
Screws: 3HAB3409-52 (M10x35).
xx1300002567
Note
Only use specified screws, never replace
them with other screws.
xx1300000523
Tightening torque: 40 Nm.
Product manual - IRB 1200
3HAC046983-001 Revision: S