4 Repair
4.6.6 Replacing the axis-4 timing belt
Continued
3
4
5
Removing the air hoses
1
Continues on next page
746
Action
Loosen the two attachment screws and
move the motor downwards to slacken the
timing belt.
Remove the motor screws and washers
and carefully lift out the motor and the pul-
ley.
Remove the timing belt from its groove on
the motor.
Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
© Copyright 2014 - 2021 ABB. All rights reserved.
Note
xx1300002524
xx1300002522
Note
Product manual - IRB 1200
3HAC046983-001 Revision: S