Type A Of Irb 1200 - ABB IRB 1200 Product Manual

7 Robot description

7.2 Type A of IRB 1200

7.2 Type A of IRB 1200
Type A - Axis Calibration
The difference between IRB 1200 and IRB 1200 Type A is that the Type A is
calibrated with Axis Calibration. On each axis there are bushings for installation
of calibration tools.
As a result of this, the castings differ between IRB 1200 and IRB 1200 Type A.
How to know which type the robot is?
The type label on the base of the robot tells if the robot is calibrated with Axis
Calibration.
Those robots are named IRB 1200 Type A.
Those robots which are not equipped for Axis Calibration are simply named IRB
1200 (no type specified).
872
Note
IRB 1200 Type B is designed based on IRB 1200 Type A so that Type B has the
bushings for installation of calibration tools too.
The difference between IRB 1200 Type A and IRB 1200 Type B is that Type B
also supports SafeMove 2. See
Note
If no type label attached on the robot, use the bushings on each axis to identify
a robot calibrated with Axis Calibration.
© Copyright 2014 - 2021 ABB. All rights reserved.
Type B of IRB 1200 on page 873.
Product manual - IRB 1200
3HAC046983-001 Revision: S