Replacing The Protection Hose - Irbdp Sw6 Ui And Mh6 Ui - ABB DressPack IRB6650S Product Manual

4.2.15 Replacing the protection hose - IRBDP SW6 UI and MH6 UI

Location of protection hose
The protection hose, upper arm, is located as shown in the figure.
xx1500001641
A
B
Required equipment
Spare parts
Protection hose, upper arm,
front part (1080 mm)
Protection hose, upper arm,
back part (500 mm)
Required equipment
Equipment
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
4.2.15 Replacing the protection hose - IRBDP SW6 UI and MH6 UI
Protection hose, back end
Protection hose, front end
Article number
Wear parts on page 377
Article number
© Copyright 2004-2018 ABB. All rights reserved.
4 Repair
Note
Note
Content is defined in section
Standard toolkit on page 355.
These procedures include refer-
ences to the tools required.
Continues on next page
305