Manual Calibration Method - Calibrating Axis 4 - ABB IRB 1200 Product Manual

5 Calibration

5.6.6 Manual calibration method - calibrating axis 4

5.6.6 Manual calibration method - calibrating axis 4
Calibration position of axis 4
The figure shows axis 4 in calibration position, with calibration tools fitted.
xx1400001207
Required equipment
Equipment
Calibration toolkit, manual calibra-
tion
i
Required consumables
Equipment
Cleaning agent
Calibrating axis 4
Moving the robot to calibration position
1
Continues on next page
854
The robot is calibrated by either manual calibration or Axis Calibration at factory. Always use the
same calibration method as used at the factory.
Information about valid calibration method is found on the calibration label or in the calibration
menu on the FlexPendant.
If no data is found related to standard calibration, manual calibration is used as default.
Action
Jog all axes to zero position.
Rotate axis 4 some degrees toward positive direc-
tion to avoid interference between the calibration
tools when fitting them.
© Copyright 2014 - 2021 ABB. All rights reserved.
Art. no. Note
3HAC051256-001 Includes calibration tools, pins
and attachment screws for
manual calibration method.
Art. no. Note
- Isopropanol
Note
i
Product manual - IRB 1200
3HAC046983-001 Revision: S