ABB IRB 1200 Product Manual page 230

4 Repair
4.3.1 Replacing the main cable package
Continued
6
7
8
Continues on next page
230
Action
Refit the fix sheet to the inner plastic guide.
Fit the air hose holder to the bracket.
Replace the holder, if damaged.
Tip
If the air hose holder is difficult to fit, firstly remove
the bracket from the fix sheet by removing the two
M3 screws. Fit the holder to the bracket and then
refit the complete assembly to the fix sheet again.
Tightening torque for the two M3 screws: 1.5 Nm.
xx1400001133
Reconnect the axis-3 motor connectors.
© Copyright 2014 - 2021 ABB. All rights reserved.
Note
Tightening torque: 1.5 Nm.
xx1300002421
Air hose holders are included in
Cable harness material set
(3HAC049663-001).
Tightening torque: 4 Nm.
xx1300002422
xx1300002420
Product manual - IRB 1200
3HAC046983-001 Revision: S