ABB IRB 1200 Product Manual page 401

4
5
6
7
Product manual - IRB 1200
3HAC046983-001 Revision: S
Action
Insert two M4 screws to the pressed out holes
and press out the stainless shaft.
Place the flange tightening tool together with a
3/8" (10 mm) socket spanner on the seal ring unit
and loosen the unit.
Remove the gasket and seal ring unit.
Replace the damaged parts with new ones.
© Copyright 2014 - 2021 ABB. All rights reserved.
4.4.3 Replacing the tubular spare parts
Note
xx2100001450
xx2100001451
Flange tightening tool:
3HAC079686-001
xx2100001452
xx2100001453
Continues on next page
4 Repair
Continued
401