2 Installation and commissioning
2.3.9 Installation of chip protection - IRB 6660 - 205/1.9
2.3.9 Installation of chip protection - IRB 6660 - 205/1.9
Location of chip protection
The chip protection is installed on the lower arm as shown in the figure below.
xx0700000630
A
B
C
D
Required equipment
Equipment
Chip protection
Locking liquid
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
88
Note
This section is only applicable to the robot variant IRB 6660 - 205/1.9.
Bracket
Attachment screws M6x16 quality 8.8-A2F (2 pcs per side)
Attachment screws M6x16 quality 8.8-A2F (4 pcs)
Protection
© Copyright 2007-2018 ABB. All rights reserved.
Art. no.
3HAC030124-001
-
Note
Loctite 243
For locking screws.
Content is defined in section
Standard tools on page
381.
These procedures include
references to the tools re-
quired.
Product manual - IRB 6660
3HAC028197-001 Revision: S