ABB IRB 1200 Product Manual page 145

Spare part
Gasket, axis 6, Hygienic
Seal ring unit
Sealing washer
Required tools and equipment
Equipment, etc.
Standard toolkit
Flange tightening tool
Guide pin for stainless shaft
on tool flange
Required consumables
Consumable
Grease
Replacing the sealing parts on tool flange of Hygienic robots
1
Product manual - IRB 1200
3HAC046983-001 Revision: S
3.4.2 Replacing the sealing set on tool flange of Hygienic robots
CAUTION
Always cut the paint with a knife and grind the paint edge when disassembling
parts. See Cut the paint or surface on the robot before replacing parts on page
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
© Copyright 2014 - 2021 ABB. All rights reserved.
Art. no.
3HAC078798-001
3HAC079688-001
3HAC034160-003
Article number Note
- Content is defined in section
toolkit on page
3HAC079686-001 Used with robots in protection type
Hygienic
Used for loosen and tighten the seal
ring unit on tool flange of the Hygienic
robots.
3HAC079684-001 Used with robots in protection type
Hygienic
Art. no.
3HAC070875-001
Note
3 Maintenance
Continued
Note
Used with protection type Hy-
gienic.
Replace if damaged.
Used with protection type Hy-
gienic.
Replace if damaged.
The seal ring unit is wear part.
Used with protection type Hy-
gienic.
Replace if damaged.
Standard
890.
Note
Molykote P1900
For robots with protection type
Hygienic
Continues on next page
158.
145