Axis 3
xx1400000386
Required spare parts
Spare part
Mechanical stop set, axis 1
Mechanical stop set, axis 2
Mechanical stop set, axis 3
Required tools and equipment
Visual inspection, no tools are required.
Other tools and procedures may be required if the spare part needs to be replaced.
These are specified in the replacement procedure.
Product manual - IRB 1200
3HAC046983-001 Revision: S
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 1200 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2014 - 2021 ABB. All rights reserved.
3.3.4 Inspecting mechanical stops
Article number
Note
3HAC049630-001
Includes mechanical stop pin (1
pc), washer and screw.
3HAC049637-001
Includes mechanical stop pin (1
pc) and screws.
3HAC049644-001
Includes mechanical stop pin (1
pc) and screws.
3 Maintenance
Continued
Continues on next page
127