3 Maintenance
3.4.1 Replacing the battery pack
Continued
6
7
8
Continues on next page
142
Action
Valid for IRB 1200 Type B
Connect the connectors to the SMB unit.
•
R1.ME1,2,4,5
•
R1.ME3,6
•
R2.SMB
WARNING
Make sure not to mix the R2.SMB and R2.ME2.
Axis 2 may be severely damaged. See the labels
on the connectors for correct connection.
Valid for IRB 1200 Type B
Tighten the connector screws.
Refit the EIB/SMB cover to the lower arm with the
attachment screws.
© Copyright 2014 - 2021 ABB. All rights reserved.
Note
xx1700000005
Tightening torque: 0.3 Nm
xx1700000004
Screws: 3HAB3409-207 (M3x8).
Tightening torque: 1.5 Nm
xx1300002427
Note
Only use specified screws, never
replace them with other screws.
Product manual - IRB 1200
3HAC046983-001 Revision: S