ABB IRB 1200 Product Manual page 853

2
3
After calibration
1
Product manual - IRB 1200
3HAC046983-001 Revision: S
Action
Jog axis 3 to zero degree using the FlexPendant.
Check that the synchronization marks on axis 3
are aligned with eachother.
Are they aligned within the tolerances?
• If yes, the calibration is verified OK.
• If no, redo the fine calibration procedure.
Action
Write down the new system parameters on a new
label and stick on top of the calibration label on
the robot.
© Copyright 2014 - 2021 ABB. All rights reserved.
5.6.5 Manual calibration method - calibrating axis 3
Note
xx1400001094
Note
5 Calibration
Continued
853