ABB IRB 1200 Product Manual page 50

2 Installation and commissioning
2.2.4 Pre-installation procedure
Continued
5
6
7
8
9
10
11
Weight, robot
The table shows the weight of the robot.
Robot model
IRB 1200
Continues on next page
50
Action
Make sure that the lifting accessory used (if required) is suitable to handle the weight
of the robot as specified in:
If the robot is not installed directly, it must be stored as described in:
tions, robot on page 53
Make sure that the expected operating environment of the robot conforms to the
specifications as described in:
Before taking the robot to its installation site, make sure that the site conforms to:
• Loads on foundation, robot on page 51
• Protection classes, robot on page 53
• Requirements, foundation on page 52
Before moving the robot, please observe the stability of the robot:
bility on page 62
When these prerequisites are met, the robot can be taken to its installation site as
described in section:
Install required equipment, if any.
• Installing the signal lamp on IRC5 robots on page 94
Note
The weight does not include tools and other equipment fitted on the robot.
© Copyright 2014 - 2021 ABB. All rights reserved.
Weight, robot on page 50
Operating conditions, robot on page 53
On-site installation on page 65
Weight
IRB 1200-5/0.9: 54 kg
IRB 1200-7/0.7: 52 kg
Storage condi-
Risk of tipping/sta-
Product manual - IRB 1200
3HAC046983-001 Revision: S