Advertisement
Step 3: Connecting the Equipment
LX II switch-only models: DLX2-108, DLX2-116, DLX2-216
LX II integrated switch/LED drawer models: DLX2-108-LED, DLX2-116-LED, DLX2-216-LED
A. AC Power
To connect the power supply:
•
Attach the included AC power cord to the LX II and plug it into
an AC power outlet.
B: USB Ports and Additional Local Access Port on
Switch-Only Models
To connect a local console to a Switch-Only Model:
Attach a multi-sync VGA monitor, and USB mouse and keyboard.
Note: VGA Port not available on integrated switch/LED drawer
models.
C: Network Port
To connect the network:
•
Connect a standard Ethernet cable from the network port to an
Ethernet switch, hub, or router.
D: Target Server Ports
To connect target servers:
1. Connect the keyboard, mouse and video plugs on the CIM to
the corresponding ports on the target server.
2. Connect the CIM to an available target server port on the back
of the LX II via a Cat5/5e/6 cable.
E: Modem Port (Optional)
See Configuring Modem Settings, in the Online Help.
Dominion LX II Quick Setup Guide
QSG-DLX2-v3.0.0-0B-E 255-62-0024-00
F: Power Switch (Integrated Switch/LED Drawer Models
Only)
Use the On/Off switch to operate the integrated LED screen.
QS Rule
Step 4: Configuring the LX II
For the following steps, you must change the default password and
assign the LX II its IP address at the Local Console. All other steps
can be performed either from the Local Console, or the LX II
Remote Console in a web browser using the LX II's IP address.
Default Login - Change the Password
The LX II device is shipped with the following default settings. You
are forced to change the password at first login. Up to 64 English
alphanumeric and special characters allowed.
•
Username = admin
•
Password = raritan
•
IP address = 192.168.0.192
Important: For backup and business continuity purposes, it is
strongly recommended you create a backup administrator
username and password, and keep that information in a secure
location.
3
Advertisement
