Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Figure 3-4 Administration & SFP tabs, SFP Port Configuration
Table 3-5 Administration & SFP tabs, SFP Port Parameters
Administration & SFP
Port Parameters
Status
Speed
Duplex
Note; The following SFP Port Parameters are read from the plugged in SFP Transceiver
Connector
Bit Rate
Wavelength
Vendor Name
Model Type
Description
Disables / Enables the port; Options: On, Off
Displays 1000M or 100M, in accordance with the SFP
plugged in transceiver. Otherwise, it is kept in Auto. Oper
field displays the actual speed value, once it is established
with the F/O link partner.
When the system detects 100Mbit SFP it enables Full/Half
Duplex setting for the port. Otherwise, it is kept in Auto
Oper field displays the actual value, once it is established
with the F/O link partner.
Identified type of connector
Identified bit rate
Identified wavelength
Identified Vendor Name, Model Type and Serial Number
SUMMARY
Page 21 of 87
Advertisement
Table of Contents
