Table of Contents
Advertisement
installation & setup
step two
Check for the following wires:
HOT or LINE: Receives power from the circuit box Referred to as "hot" for the
1
purposes of this guide Do not touch or let "hot" wires contact other wires
LOAD: Directs power to your light(s)
2
NEUTRAL: Creates a path to return current to the power source when the
3
device is off Required for your switch installation
GROUND: Provides a safe path for electricity in the event of a short circuit
4
NOTE: Refer to the "faqs" on page 25 if you are unsure of your wiring.
10
|
remove the existing device
Hide quick links:
Advertisement
Table of Contents
